SATA Cables, 4pcs/set SATA Straight to 90 Degree SATA Data cable, Half Sleeved 6gb SATA 3 cable connect to motherboards and host controllers to internal cd writer, SAS/SATA hard drives, bitcoin computer and hdd ssd cd driver, DVD drives, Note: this sata cables are SATA data cable only, does not provide power for your hard drive, Drive must be powered separately
Serial ata cable/SAS cable Surport up to 6Gbps Data transfer rates, quickly upgrading your computer for expanded storage, backwards compatible with SATA I and SATA II hard drives, the flexible sata cable bundle cables data transfer speed is limited by rating of the attached equipment
SATA Straight angle Female to SATA Right angle Female SATA cord designe, build with 12G high speed SAS thin sata cable for better singnal performance,nylon braided put all 4 pcs sata cables together,make for better cable management in tight space, P1 to P4 cable are labeled for easy to route for different SATA systems or for RAID configuration
Support all popular SATA equipped device in market with SATA HDD, SSD,CD Writer, CD Driver. Widely Compatible with 2.5” SSDs, 3.5” HDDs, optical drives, RAID controllers, embedded computers and controllers, aslo work as replacement for Bitcoin computer,Do not need any software installation
What You Get: Short sata cable 0.5M/1.6FT 4Pcs/set SATA Straight Angle Female to SATA 90 Degree down angle Female SATA 7Pin data cable
Package Dimensions
6.81 x 5.28 x 0.63 inches, 1.13 Ounces
Date First Available
May 18, 2022
Manufacturer
AdcAudx
4 reviews for ADCAUDX SATA-III Cable:0.5M, 4Pcs/Set-SATA Cable 90-Degree Right-Angle SATA-Data Cable SAS/SATA-6Gbps Cable for Server-Raid Computer SDD HDD CD DVD…
Rated 5 out of 5
Kirk F. Smith –
I used this cable when I built my NAS in a JONSBO N1 Mini-ITX NAS Chassis which was a tight fit. Perfect for this use!
Rated 5 out of 5
Ike –
Not much to say, they work and seem to be made well enough.
Rated 5 out of 5
BS –
Works and looks cool
Rated 4 out of 5
J. Smith –
While these cables work well, they are not flexible with the cable cover and tape. The wires are actually kind of stiff. This won’t be an issue for everyone, but if you have a tight area, you may have to do like I did and remove the cable cover to reach all your drives.
Kirk F. Smith –
I used this cable when I built my NAS in a JONSBO N1 Mini-ITX NAS Chassis which was a tight fit. Perfect for this use!
Ike –
Not much to say, they work and seem to be made well enough.
BS –
Works and looks cool
J. Smith –
While these cables work well, they are not flexible with the cable cover and tape. The wires are actually kind of stiff. This won’t be an issue for everyone, but if you have a tight area, you may have to do like I did and remove the cable cover to reach all your drives.